Waterproofing your leather shoes (as well as some types of cloth shoes) is essential to surviving winter weather, since water can damage or completely ruin leather. All waterproofing solutions work similarly to create a thin barrier on the surface of your leather that cannot be penetrated by water.
Before you get started the waterproofing process, take a close look at your shoes and determine what type of leather and other materials it is made of. Look into the shoe box for any special cleaning instructions that you will need to keep in mind. Then select a protecting product that is made for your type of leather.
For waterproofing shoes, best site here you may select whether spray or a semi-solid wax product. Sprays are simpler to use, but might not be able to provide a good thick waterproofing coat. On the other hand, you ought not use a spray (which usually consists of silicone) on thin, sensitive leathers. The manufacturer of the leather may recommend a basic semi-solid product for waterproofing shoes.
Before you get started waterproofing, do a “spot test” on a small, hard-to-see area on your shoes. A good spot is somewhere inside the shoes, such as on the underside of the language. If you notice any color or texture changes, or any damage, stop and do not use the product. Contact the maker of your shoes to learn how to proceed.
If all moves well, you can start waterproofing leather. Some waxy products contain a brush, and some are rub-on. In case utilizing a rub-on product, get an easy, soft, cloth. Study the directions first - most likely, they are going to explain to you to rub in slow circular motions also to apply more than one coat for waterproofing shoes.
If you use a brush, the process is much the same, apart from that you can make slower circular motions with the brush, and try to apply a bit of pressure so that the brush can get deep into breaks. However, be sure you are utilizing a soft brush specially made for this purpose, otherwise you might scratch the shoes. Professionals usually recommend that a brush supply for fabric waterproofing, as well.
Speaking of cracks, whether by using a towel or brush, you will need to spend extra attention on all seams, cracks, raised areas, and any imperfections in the leather. Slather and take note on these areas so that it can really sink in, and rub copiously. Repeat up to three times if necessary to waterproof these important areas.